Empty
0

My Cart

item(s) - FREE!

Kawasaki Teryx Universal 6 Speaker All Weather Sound Bar with Bluetooth

499.95
499.95 $499.95

Availability: In Stock

FREE SHIPPING

The MTX MUD6SPBT is an outdoor, weather-resistant, and super-rugged universal sound bar solution that is designed to deliver exceptional audio quality to any motor sports vehicle.

Qty:
Add to Wishlist

SKU: MUD6SPBT-EKT
Brand: MTX Audio

Kawasaki Teryx Universal 6 Speaker All Weather Sound Bar with Bluetooth

Versatile And Rugged

The MTX MUD6SPBT is a universal sound bar solution that is designed to deliver exceptional audio quality to any vehicle. This all-in-one unit includes six total speakers, four 3" full range drivers and two 1" high frequency tweeters. All speakers are connected to an internal power amplifier that delivers all of the power you need to hear your music whether you are on land or water.

The integrated Bluetooth receiver allows you to stream music directly from your smartphone or tablet or you can direct connect your device via an external 3.5mm input. Additionally, the unit includes a 3.5mm auxiliary output allowing you to integrate an external amplifier and subwoofer if desired or to go out to another MUD6SPBT for even greater sound coverage.

Plenty Of Power

This all-in-one unit includes six total speakers delivering all of the power you need to hear your music while you are speeding over land or water.

21-3/8" long, universal mounting clamps fit bars between 1.5" and 2.25.

MUD6SPBT - Key Features

  • Four 3" Full Range Speakers and Two 1" HF Tweeters
  • All Weather Construction for Use on Any Vehicle
  • Integrated Bluetooth Receiver
  • Auxiliary Input for Connecting Devices Via 3.5mm Cable
  • Auxiliary Output for Connecting An External Amplifier or Additional Sound Bar
  • Universal Mounting Clamps Fit Bars Between 1.5" and 2.25"
  • Power, Ground, and Accessory Wire Included For Easy Installation

MTX-User-Manual

IN THE BOX 

• Universal Bluetooth Sound Bar

• Installation Cables (Power/Ground/Accessory)

 • Universal Mounting Clamps

INTRODUCTION

Thank you for purchasing this MTX Audio Universal Bluetooth Sound Bar that is designed to work with most Bluetooth enabled devices including iPhone® and Android® smartphones and tablets. This easy to install and use all in one unit is capable of transforming your Bluetooth enabled mobile device into the center of your vehicle’s audio system. Designed to mount a variety of bars including roll cages, towers, and handlebars, it can be used on motorcycles, side-by-sides, boats, or trucks. Congratulations and enjoy the ultimate audio experience with MTX

FEATURES

• Four 3" Full Range Speakers and Two 1" High Frequency Tweeters  

• All-Weather Construction for Use In Almost Any Environment 

• All-Weather Construction for Use In Almost Any Environment 

• Integrated Bluetooth Receiver 

• Auxiliary Input for Connecting Devices Via 3.5mm Cable 

• Auxiliary Output for Connecting An External Amplifier or Additional Sound Bar

MTX-User-Manual-Picture-1

 

ELECTRICAL OPERATION 

1. Tap the Power button to turn the unit on. (Power, Ground, and ACC wire need to be connected to a 12V power source.)

2. Tap the Power button to switch modes between Bluetooth and AUX.  

3. Hold the Power button for 2 seconds to turn the unit off.  Note: The buttons will stay illuminated as long as the ACC wire has 12V applied to it.  

4. The included fuse loop, ring terminals, and butt connector allow for easy wire connection to a 12V power source.

 Note: The indicator light will illuminate Blue when in Bluetooth mode and Green when in AUX mode.

 OPERATION

1. Power the unit on by tapping the Power button once.

2. Select Bluetooth by tapping the Power button until it blinks Blue.

3. Select “MTX Sound Bar” from the menu on your Bluetooth enabled device. The unit will power on in Bluetooth mode first when it is turned on by tapping. If the accessory wire is disconnected, (vehicle is turned off and then turned on) the unit will revert back to the previous Bluetooth or AUX setting.

4. Choose “Pair” when prompted.

5. Once “Paired” the unit will be able to play audio from your Bluetooth device.

The front panel control buttons will control track forward/back and volume up/down in this mode. The Play/Pause button will mute the output and the LED indicator will blink Blue when in Mute mode.

Follow these steps to utilize Bluetooth in a NFC (Near Field Communication) enabled device:

1. Power the unit on by tapping the Power button once.

2. Select Bluetooth by tapping the Power button until it blinks Blue.

3. Tap the NFC enabled device on the left side of the enclosure (marked by NFC label).

4. Choose “Pair” when prompted.

5. Once “Paired” the unit will be able to play audio from your NFC device.

 

Follow these steps to utilize an Auxiliary input device:

1. Power the unit On by tapping the Power button once.

2. Select Auxiliary by tapping the Power button until it blinks Green.

3. Connect an audio device to the AUX input using the “Green” 3.5mm input on the side of the unit. The LED will illuminate Green, and will blink Green when in mute mode.

The front panel control buttons will adjust the Volume up/down in this mode. The Play/Pause button will mute the audio output and the LED indicator will blink Green when in Mute mode.

Using the auxiliary output (black connector).

1. Auxiliary out is a variable output that allows connection to a secondary audio device, whether it is an external amplifier connected to speakers or subwoofer.

 2. The MUD6SPBT can be used with a second MUD6SPBT unit. For the best audio performance, the second unit connected via Auxiliary should have the volume set to the max.

 

Controlling the Volume

The LED indicator light will blink in both Bluetooth and AUX modes at max volume.

INSTALLATION

The MUD6SPBT can be used with any 12-volt battery and can be mounted to a variety of bars using the included hardware. The unit has three wires in its wiring pigtail.  The red wire, hot, should be directly connected to the vehicles positive battery terminal, the black wire, ground, should be connected directly to the vehicle’s chassis where paint has been removed or the negative terminal on the battery, and the blue wire, accessory, should be connected to the ignition wire on the vehicle.

 

The unit features fully adjustable clamps for mounting to bars between 1.5" and 2.25". The clamps can be used on either the top channel, rear channel, or bottom channel and each channel can be adjusted to fit multiple types of bars including vertical, horizontal, or angled bars allowing for multiple installation options.

Mounting  

1. Via Pipe Clamp (Bracket)

2. Via Hex Bolt through Dove Tail Piece

Mounting via Pipe Clamp (Bracket) 

• Take 14 mm bolt with lock washer and place it through bottom of clamp and slightly thread into Dove tailed piece. 

• Slide assembly and land lock washer into one of the three dove tail recessed areas placing the unit at angle/mounting location to dial in bracket angle and placement. 

• Tighten bolt down 95in.lbs. / 8ft.lbs. max to securely hold bracket in place.

• Do this for both brackets as two are included with each speaker bar.  NO less that two should be used during installation.

 • Use bracket top half and tighten down over bar using the four included bolts, two per clamp.

• Tighten until the unit is secure.

• Connect wires to power, ground, and ignition.

Mounting Via Hex Bolt through Dove Tail Piece 

1. Included are two hex bolts that fit into the dove tails.

2. Slide dove tails with bolts in to one of the three recessed areas.

3. Place bolts in location where the unit is to be tightened down.

4. Use included lock washer and nuts to secure into place.

5. Tighten nut 95in.lbs. / 8ft.lbs. max so unit is secure.

6. Connect wires to power, ground, and ignition

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, this is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:

 

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a different circuit than the one to which the receiver is connected. 

• Consult the dealer or an experienced radio/TV technician for help. 

Only registered users can write reviews. Please, log in or register

Kawasaki Teryx No
Teryx 4 No
Install Information File N/A

Everything Polaris Ranger offers a VIP experience for all customers

Our Polaris Experts are standing by, ready to answer questions or go into more detail about the features and benefits of this product, help you to explore similar or complimentary products, confirm vehicle fitment and more.

Experience The Everything Advantage

  • 100% Satisfaction Guarantee
  • Personalized Expert Service
  • 4% Cash Back Rewards
  • Huge In-Stock Inventory
  • Always Secure Shopping
  • Free Shipping on Orders Over $149
  • $9.95 Flat Rate Shipping on Everything Else

Contact Us Today!

Phone: 1(800) 920-7574       Mon-Fri   8AM-5PM CST
Email: sales@everythingpolarisranger.com

Product Fitment

Kawasaki Teryx No
Teryx 4 No
Install Information File N/A